Carry Air Pocket Monitor before stepping out of your house in order to know the quality of the air you’re breathing. The pocket-sized air monitoring device is handy and easy to carry around.
It helps you understand the level of Particulate Matter 2.5 of your location. Works as both – real-time indoor and outdoor air quality monitoring sensor; the LCD display shows you PM reading indicating if the air is safe or not.
Having a desktop friendly version helps to determine the quality of air which can help you improving your life and work quality.
- Shows the value of PM2.5 along with the safety level.
- Shows simultaneous value of PM1.0, PM2.5 and PM10.
- Plots the graph of PM2.5 on a graph in difference of 5 minutes.
- Approx. 1.5 hours Battery Backup.
- Type C charging support.
- Download the latest version of firmware from the /Firmware folder
- Edit the Firmware as per the requirement with the help of guide provided in /Firmware/README.md
- Order the components from the Bill of Materials as per the requirement.
- Make the Hardware circuit
- Solder them on General Purpose PCB Board using the design below (or)
- Order the PCB by providing the PCB Developer with the gerber file available in /Hardware/PCB_Gerber.zip and solder all the component on it
- Upload the firmware on the the hardware
- Press the push button to turn on the device.
- The device will start with a bootup screen with the company logo.
- The landing page will show the value of PM 2.5 of screen.
- Press the change screen button to switch between pages. The device works in 3 modes:
- Live PM 2.5 data screen.
- Live PM 1.0, PM 2.5, PM 10 data screen.
- PM 2.5 graph screen which plots the value of PM 2.5 in bar graph at an interval of 5 mins.
Top View
Bottom View
- Designed for: Ecologic Pvt. Ltd.
- Designed by: Parth Patel