Attaching the wireless antenna

Required Items:

1. Top Plate or completed base chassis

2. Custom Metal

   • Wireless Mount

3. Custom Insulation

   • Wireless Insulation
4. 1. 6-32 Black 1/2" button head socket screw
5. 1. 6 Neoprene washer
6. 1. 6 black nut

7. 2x Wireless Antenna

8. 2x Wireless Antenna Extension Cable.

9. 2x 1/4-20 rubber washers.

Important Notes:

1. All nuts will be on the inside of the box. Washer will be used on the top surface.
2. Can be done parallel to the base chassis being constructed, since it only needs to be attached on the top plate.
3. Remember to use loctite
4. Remember to use the 2x 1/4" washers when mounting the antennas